I've recently been creating custom colored Windowblinds via the WB config (Look & Feel > Colours > Create New/Delete Preset) option.

Once I attempt to change a Windowblind by applying it via Theme Manager my custom color will be applied to that WB skin (Something I don't want and don't think should be happening). This only happens when I try to change/apply a Windowblind skin via Theme Manager. I can apply any Windowblind via the WB Config and it will be applied with the Default skin color (which is what I want and what I believe should happen).

Steps I've taken to reproduce this:

• Applied the Turbo WindowBlind (default color)


• Open WB Config > Look & Feel > Colours > selected Create New/Delete Preset > Created a Preset


• Made sure to select that preset and change the color


• Click the Apply Changes Button in the upper right hand corner


• Once applied Open Theme Manager and apply any theme


• The Windowblind should be shown with the custom color you chose

Again, I have to apply the Windowblind a second time using the WB config to have it set to the default color.

Specs:
Vista Ultimate x64
WB6 version 6.00[b].102
Theme Manager 2.50c.046

I've recently been creating custom colored Windowblinds via the WB config (Look & Feel > Colours > Create New/Delete Preset) option.

Once I attempt to change a Windowblind by applying it via Theme Manager my custom color will be applied to that WB skin (Something I don't want and don't think should be happening). This only happens when I try to change/apply a Windowblind skin via Theme Manager. I can apply any Windowblind via the WB Config and it will be applied with the Default skin color (which is what I want and what I believe should happen).

Steps I've taken to reproduce this:

• Applied the Turbo WindowBlind (default color)


• Open WB Config > Look & Feel > Colours > selected Create New/Delete Preset > Created a Preset


• Made sure to select that preset and change the color


• Click the Apply Changes Button in the upper right hand corner


• Once applied Open Theme Manager and apply any theme


• The Windowblind should be shown with the custom color you chose

Again, I have to apply the Windowblind a second time using the WB config to have it set to the default color.

Specs:
Vista Ultimate x64
WB6 version 6.00[b].102
Theme Manager 2.50c.046

I've just recently attempted to open a dockzip on Vista x64 and noticed that the window doesn't show correctly. The screen shot shows how the two buttons are cut off.

Note: This only happens when a WindowBlinds skin is applied. I've tested three skins; Diamond, Adamant, Adrenaline and reproduced it with all three. Unloaded WindowBlinds and tried it with just Aero running and it showed fine.

Specs:
Vista Ultimate x64
Object Dock Plus version 1.90i[b].020
Windowblinds 6 version 6.00[b].099

I've just recently attempted to open a dockzip on Vista x64 and noticed that the window doesn't show correctly. The screen shot shows how the two buttons are cut off.

Note: This only happens when a WindowBlinds skin is applied. I've tested three skins; Diamond, Adamant, Adrenaline and reproduced it with all three. Unloaded WindowBlinds and tried it with just Aero running and it showed fine.

Specs:
Vista Ultimate x64
Object Dock Plus version 1.90i[b].020
Windowblinds 6 version 6.00[b].099

Tabbed Dock does not allow me to resize on the X axis…

Specs: Tabbed Dock - Set to show as a drawer with mouseover activation on – No Hotspots are set - Position is on the left. Vista Ultimate x64.

Problem/Reproduction steps:
Use the mouseover action to bring out the dock, select dock settings, select position, select right, then attempt to resize the dock using the mouse hovered in the lower left hand corner (on the X axis). I’m unable to do this; however, if I switch back to the left side I’m able to resize it on the X axis.

Note: I can resize it on the Y axis whenever I changed from the left or right side. Also, if after I switch the dock to the right or left side (the one where I can’t use the X resize) all I have to do it pull the dock away from the screen edge and place it back to be able to use the X axis.

This is also reproducible using the Y axis for the Top and Bottom positions.

Tabbed Dock does not allow me to resize on the X axis…

Specs: Tabbed Dock - Set to show as a drawer with mouseover activation on – No Hotspots are set - Position is on the left. Vista Ultimate x64.

Problem/Reproduction steps:
Use the mouseover action to bring out the dock, select dock settings, select position, select right, then attempt to resize the dock using the mouse hovered in the lower left hand corner (on the X axis). I’m unable to do this; however, if I switch back to the left side I’m able to resize it on the X axis.

Note: I can resize it on the Y axis whenever I changed from the left or right side. Also, if after I switch the dock to the right or left side (the one where I can’t use the X resize) all I have to do it pull the dock away from the screen edge and place it back to be able to use the X axis.

This is also reproducible using the Y axis for the Top and Bottom positions.

Select the features tab from the link below and you'll see that Process Identification gets displayed twice.

Here's another update to a great application!

So last night I'm just lounging around in #stardock when this comes up "*ZubaZ* My high scrore is 5620. Your turn: http://www.ferryhalim.com/orisinal/g3/bells.htm". Naturally I clicked (saw it was a game) and was surprised to find out I couldn't get past 5620! So began my crusade to show Zubaz just who the master really was. Well as you can see from the SS, I far exceeded this number. I'll admit, Zubaz is a worthy opponent, but be assured there can be only one!

Which brings me to this post. I thought this would be an interesting challenge (for those of you who think your worthy) to see if you can become the master. If not, then Enjoy anyway!

Oh, if you choose to accept this challenge, you must take a SS or you entry will not be valid. Have a nice day!

Some of the "All Programs" menu icons are not showing the icons they should be. Actually, they're showing the "default" unidentified icon images. Only .exe's and .html files are broken and it seems on random app's/.html files.

I have many programs/.html files where they display the correct icons.

I have made attempts to correct this issue via IconPackager. I've loaded the default XP icons, repaired the cache, icon images, Shell icons with no change what-so-ever.

Any assistance is hugely appreciated!